Have you bought PLC to improve Wi-Fi? Follow these tips
How to use PLC devices well
If you have recently bought some PLC devices to improve your home Wi-Fi, you may be wondering if you have to do something to make them work well. The truth is that there are some details that should be reviewed to avoid cut-offs and that the speed of the network is not good. We can connect to these devices both by Ethernet cable as well as by Wi-Fi and failures can appear in both cases.
Do not use strips
The first tip to increase the speed of PLCs is to connect them directly to electricity. We should not use power strips where we connect other appliances, as this could subtract power and cause it to malfunction. It is surely the most important circumstance that can cause errors.
It is true that with so many devices sometimes we do not have more plugs and we have to pull these devices. They work well, they allow us to connect chargers, computers, external hard drives, or any similar equipment. But of course, when it comes to connecting PLCs, which are going to use the wiring to carry the connection from one place to another, things change and it is better to avoid it.
Avoid having other devices next to you
The interference from other devices may also influence the operation of the PLC. Whenever possible, avoid having any electronic gadgets. The more isolated the PLCs are, the better to avoid complications that affect performance.
By this, we do not mean only that they are physically close, but also connected to electricity. It is something similar to what we mentioned about the strips. If for example, we have two plugs that are next to each other, whenever we can it is better to avoid connecting another device to that second connector.
The distance can not be too great
Although it is true that PLC devices can cover a large area, do not think that the distance can be excessively great and it will work just the same. The greater the distance, the more problems we can have, with speed and quality limitations.
We must control this point and not connect the devices too far. Also, the distance can be shortened if the wiring is old or in poor condition. This could affect that distance a lot and we get to have problems whether we connect by Ethernet cable to the PLC, or if we use the Wi-Fi option.
In short, these are some of the main points that must be taken into account when we are going to use PLC devices. The goal is to maintain the best possible speed and reduce connection problems, which can lead to widespread outages and failures.